Printing single labels on a Dymo label printer

Top  Previous  Next

The "label" printing function in Campground Master assumes that you're using a standard sheet of 30 labels on a full-page printer.  However if you have a Dymo label printer (or similar single-label printer), you can use the Envelope printing function to print single labels on it.  

 

First you need to have the Dymo printer driver installed in Windows.  Then change the Envelope printing setup in Campground Master as described below.

 

(Keep in mind that these settings would have to be reset if you wanted to print actual envelopes or sheets of 30 labels, so keep the original settings written down.)

 

1. Go to File / Printing Options, Offsets.

2. Enter 0 for both Top and Left printer offsets.

3, Uncheck "Print the park's return address...".

4. Enter 0 for "Address position for Envelopes", Top & Left.

5. Click OK.

6. Go to File / Printer Setup / Envelopes.

7. Select the Dymo printer.

8. Select the appropriate Paper size (for the labels you're using).

9. Select Landscape for orientation.

10. Click OK

 

Now if you use the Envelope printing functions it should print the Dymo labels -- even the batch-printing functions will work to print multiple labels.  Note that the font type & size is not adjustable, but most addresses should fit on standard labels as it is.

 

The next major version of Campground Master will allow more flexibility and definition of Dymo label formats separate from envelopes, etc.  For more information on Dymo label printers, see their web site:

http://global.dymo.com/enUS/Home/default.html

 


Page URL https://CampgroundMaster.com/help/printingsinglelabelsonady.html

Campground Master Home